sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 617 |
| Shot weight | g | 0 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 230 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3000 |
| Opening Stroke | mm | 600 |
| Space between tie bars | mm x mm | 670 x 670 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 650 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 69 |
| POWER UNIT | ||
| Pump motor | kW | 207 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 135 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7823 mm |
| B | 1614 mm |
| C | 610 mm |
| D | 251 mm |
| E | 2095 mm |
| F | 4 x M10 L20 |
| G | 115 mm |
| H | 149 mm |
| J | φ80 mm |
| K | 115 mm |
| L | 184 mm |
| M | φ4 mm |
| N | SR10 |
Pipe Fittings Injection Technology Express
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Engineer Finished the Installation of New Magazines in Chile
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
