sales06@switek.biz
+86 186 5927 5869
Description | Unit | Value |
---|---|---|
INJECTION UNIT | ||
Shot volume | cm3 | 333 |
Shot weight | g | 0 |
Shot speed | mm/s | 160 |
Screw diameter | mm | 45 |
Injection pressure | MPa | 247 |
Screw L:D ratio | -- | 25 |
CLAMPING UNIT | ||
Clamping force | kN | 2300 |
Opening Stroke | mm | 550 |
Space between tie bars | mm x mm | 620 x 620 |
Mold thickness(min) | mm | 220 |
Mold thickness(max) | mm | 600 |
Hydraulic ejection stroke | mm | 150 |
Hydraulic ejection force | kN | 55 |
POWER UNIT | ||
Pump motor | kW | 112 |
Heating capacity | kW | 0 |
GENERAL | ||
Oil tank capacity | L | 122 |
Robot Installation
Platen Dimension
Machine Dimmension
# | Value |
---|---|
A | 6720 mm |
B | 1330 mm |
C | 430 mm |
D | 255 mm |
E | 2081 mm |
F | 4 x M10 L20 |
G | 115 mm |
H | 153 mm |
J | φ50 mm |
K | 115 mm |
L | 122.5 mm |
M | φ4 mm |
N | SR10 |
Pipe Fittings Injection Technology Express
SWITEK Engineer Finished the Installation of New Magazines in Chile
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China