sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1447 |
| Shot weight | g | 1317 |
| Shot speed | mm/s | 144 |
| Screw diameter | mm | 70 |
| Injection pressure | MPa | 179 |
| Screw L:D ratio | -- | 23.6 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4000 |
| Opening Stroke | mm | 710 |
| Space between tie bars | mm x mm | 745 x 705 |
| Mold thickness(min) | mm | 240 |
| Mold thickness(max) | mm | 750 |
| Hydraulic ejection stroke | mm | 170 |
| Hydraulic ejection force | kN | 90 |
| POWER UNIT | ||
| Pump motor | kW | 37 |
| Heating capacity | kW | 33.6 |
| GENERAL | ||
| Oil tank capacity | L | 700 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7440 mm |
| B | 3900 mm |
| C | 70 mm |
| D | 510 mm |
| E | 60 mm |
| F | 200 mm |
| G | 775 mm |
| H | 775 mm |
| I | 775 mm |
| J | 1195 mm |
| K | 300 mm |
| L | 1365 mm |
| M | 1525 mm |
| N | 200 mm |
| O | 60 mm |
| P | 840 mm |
Pipe Fittings Injection Technology Express
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
