sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 491 |
| Shot weight | g | 447 |
| Shot speed | mm/s | 165 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 182 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2200 |
| Opening Stroke | mm | 500 |
| Space between tie bars | mm x mm | 575 x 525 |
| Mold thickness(min) | mm | 200 |
| Mold thickness(max) | mm | 580 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 23 |
| Heating capacity | kW | 14.4 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimensions
Machine Dimmension
Pipe Fittings Injection Technology Express
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
