sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 4514 |
| Shot weight | g | 4108 |
| Shot speed | mm/s | 240 |
| Screw diameter | mm | 110 |
| Injection pressure | MPa | 141 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5000 |
| Opening Stroke | mm | 850 |
| Space between tie bars | mm x mm | 920 x 920 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 920 |
| Hydraulic ejection stroke | mm | 260 |
| Hydraulic ejection force | kN | 96 |
| POWER UNIT | ||
| Pump motor | kW | 239 |
| Heating capacity | kW | 59 |
| GENERAL | ||
| Oil tank capacity | L | 820 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 322 mm |
| B | 595 mm |
| C | 916 mm |
| D Max | 2193 mm |
| E | 5392 mm |
| L | 9225 mm |
| M Min | 8990 mm |
Pipe Fittings Injection Technology Express
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
