sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 763 |
| Shot weight | g | 557 |
| Shot speed | mm/s | 450 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 191 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4200 |
| Opening Stroke | mm | 770 |
| Space between tie bars | mm x mm | 820 x 820 |
| Mold thickness(min) | mm | 380 |
| Mold thickness(max) | mm | 825 |
| Hydraulic ejection stroke | mm | 230 |
| Hydraulic ejection force | kN | 96 |
| POWER UNIT | ||
| Pump motor | kW | 123 |
| Heating capacity | kW | 27.9 |
| GENERAL | ||
| Oil tank capacity | L | 820 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 257 mm |
| B | -3 mm |
| C | 1105 mm |
| D Max | 1795 mm |
| G | 2469 mm |
| M | 8025 mm |
| F Min | 1243 mm |
| S | 305 mm |
| SH | 2291 mm |
Pipe Fittings Injection Technology Express
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
SWITEK Engineer Finished the Installation of New Magazines in Chile
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
