sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1007 |
| Shot weight | g | 1135 |
| Shot speed | mm/s | 418 |
| Screw diameter | mm | 70 |
| Injection pressure | MPa | 112 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2500 |
| Opening Stroke | mm | 510 |
| Space between tie bars | mm x mm | 570 x 570 |
| Mold thickness(min) | mm | 200 |
| Mold thickness(max) | mm | 550 |
| Hydraulic ejection stroke | mm | 130 |
| Hydraulic ejection force | kN | 77 |
| POWER UNIT | ||
| Pump motor | kW | 22 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 300 |
Platen Dimension
Machine Dimension
Pipe Fittings Injection Technology Express
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
