sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 5316 |
| Shot weight | g | 4837 |
| Shot speed | mm/s | 1142 |
| Screw diameter | mm | 120 |
| Injection pressure | MPa | 109 |
| Screw L:D ratio | -- | 18.3 |
| CLAMPING UNIT | ||
| Clamping force | kN | 9000 |
| Opening Stroke | mm | 1600 |
| Space between tie bars | mm x mm | 1180 x 1000 |
| Mold thickness(min) | mm | 500 |
| Mold thickness(max) | mm | 1100 |
| Hydraulic ejection stroke | mm | 300 |
| Hydraulic ejection force | kN | 195 |
| POWER UNIT | ||
| Pump motor | kW | 75 |
| Heating capacity | kW | 54 |
| GENERAL | ||
| Oil tank capacity | L | 780 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2398 mm |
| B | 2286 mm |
| C | 2840 mm |
| D | 2265 mm |
| E | 1627 mm |
| F | 1577 mm |
| G | 1198 mm |
| H | 1042 mm |
| I | 544 mm |
| J | 4512 mm |
| K | 4581 mm |
| M | 3857 mm |
| N | 1740 |
Pipe Fittings Injection Technology Express
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK New Cups Carton Loading System is Ready for Delivery
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
