sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 3691 |
| Shot weight | g | 3359 |
| Shot speed | mm/s | 793 |
| Screw diameter | mm | 100 |
| Injection pressure | MPa | 157 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 7500 |
| Opening Stroke | mm | 1400 |
| Space between tie bars | mm x mm | 1110 x 960 |
| Mold thickness(min) | mm | 450 |
| Mold thickness(max) | mm | 950 |
| Hydraulic ejection stroke | mm | 300 |
| Hydraulic ejection force | kN | 195 |
| POWER UNIT | ||
| Pump motor | kW | 85 |
| Heating capacity | kW | 71 |
| GENERAL | ||
| Oil tank capacity | L | 780 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2208 mm |
| B | 2106 mm |
| C | 2700 mm |
| D | 2200 mm |
| E | 1506 mm |
| F | 1354 mm |
| G | 1198 mm |
| H | 1042 mm |
| I | 544 mm |
| J | 4055 mm |
| K | 4689 mm |
| M | 3450 mm |
| N | 1607 |
Pipe Fittings Injection Technology Express
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
