sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2262 |
| Shot weight | g | 2058 |
| Shot speed | mm/s | 548 |
| Screw diameter | mm | 80 |
| Injection pressure | MPa | 204 |
| Screw L:D ratio | -- | 24.8 |
| CLAMPING UNIT | ||
| Clamping force | kN | 6500 |
| Opening Stroke | mm | 1350 |
| Space between tie bars | mm x mm | 1040 x 910 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 950 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 110 |
| POWER UNIT | ||
| Pump motor | kW | 75 |
| Heating capacity | kW | 54 |
| GENERAL | ||
| Oil tank capacity | L | 600 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2165 mm |
| B | 2066 mm |
| C | 2686 mm |
| D | 2200 mm |
| E | 1290 mm |
| F | 1290 |
| G | 1207 mm |
| H | 1028 mm |
| I | 675 mm |
| J | 3746 mm |
| K | 4586 mm |
| M | 3191 mm |
| N | 1560 |
Pipe Fittings Injection Technology Express
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
