sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1423 |
| Shot weight | g | 1295 |
| Shot speed | mm/s | 495 |
| Screw diameter | mm | 75 |
| Injection pressure | MPa | 137 |
| Screw L:D ratio | -- | 18.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4500 |
| Opening Stroke | mm | 1050 |
| Space between tie bars | mm x mm | 810 x 800 |
| Mold thickness(min) | mm | 350 |
| Mold thickness(max) | mm | 850 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 110 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 33 |
| GENERAL | ||
| Oil tank capacity | L | 450 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2070 mm |
| B | 1986 mm |
| C | 2317 mm |
| D | 2300 mm |
| E | 1084 mm |
| F | 1084 |
| G | 1082 mm |
| H | 903 mm |
| I | 675 mm |
| J | 3269 mm |
| K | 3597 mm |
| M | 2774 mm |
| N | 1248 |
Pipe Fittings Injection Technology Express
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
SWITEK New 4 Cavities Burger King Twin-Cups Side Entry IML System Started Up
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
