sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 792 |
| Shot weight | g | 720 |
| Shot speed | mm/s | 366 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 185 |
| Screw L:D ratio | -- | 21.7 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4500 |
| Opening Stroke | mm | 1050 |
| Space between tie bars | mm x mm | 810 x 800 |
| Mold thickness(min) | mm | 350 |
| Mold thickness(max) | mm | 850 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 110 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 27 |
| GENERAL | ||
| Oil tank capacity | L | 450 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2070 mm |
| B | 1986 mm |
| C | 2317 mm |
| D | 2300 mm |
| E | 1084 mm |
| F | 1084 |
| G | 1082 mm |
| H | 903 mm |
| I | 675 mm |
| J | 3269 mm |
| K | 3597 mm |
| M | 2774 mm |
| N | 1248 |
Pipe Fittings Injection Technology Express
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Engineer Finished the Installation of New Magazines in Chile
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
