sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2300 |
| Shot weight | g | 2093 |
| Shot speed | mm/s | 540 |
| Screw diameter | mm | 83 |
| Injection pressure | MPa | 212 |
| Screw L:D ratio | -- | 23.9 |
| CLAMPING UNIT | ||
| Clamping force | kN | 6680 |
| Opening Stroke | mm | 920 |
| Space between tie bars | mm x mm | 920 x 920 |
| Mold thickness(min) | mm | 380 |
| Mold thickness(max) | mm | 920 |
| Hydraulic ejection stroke | mm | 265 |
| Hydraulic ejection force | kN | 18 |
| POWER UNIT | ||
| Pump motor | kW | 96 |
| Heating capacity | kW | 35.5 |
| GENERAL | ||
| Oil tank capacity | L | 950 |
Platen Dimension
Pipe Fittings Injection Technology Express
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
Why is An IML Package Regarded an Eco-friendly Package?
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
