sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1657 |
| Shot weight | g | 1508 |
| Shot speed | mm/s | 440 |
| Screw diameter | mm | 75 |
| Injection pressure | MPa | 183 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3980 |
| Opening Stroke | mm | 720 |
| Space between tie bars | mm x mm | 730 x 730 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 730 |
| Hydraulic ejection stroke | mm | 215 |
| Hydraulic ejection force | kN | 11 |
| POWER UNIT | ||
| Pump motor | kW | 60 |
| Heating capacity | kW | 31.1 |
| GENERAL | ||
| Oil tank capacity | L | 760 |
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
