sales06@switek.biz
+86 186 5927 5869
Description | Unit | Value |
---|---|---|
INJECTION UNIT | ||
Shot volume | cm3 | 2010 |
Shot weight | g | 1829 |
Shot speed | mm/s | 145 |
Screw diameter | mm | 80 |
Injection pressure | MPa | 162 |
Screw L:D ratio | -- | 21 |
CLAMPING UNIT | ||
Clamping force | kN | 5000 |
Opening Stroke | mm | 1335 |
Space between tie bars | mm x mm | 860 x 830 |
Mold thickness(min) | mm | 265 |
Mold thickness(max) | mm | 830 |
Hydraulic ejection stroke | mm | 250 |
Hydraulic ejection force | kN | 110 |
POWER UNIT | ||
Pump motor | kW | 52 |
Heating capacity | kW | 25 |
GENERAL | ||
Oil tank capacity | L | 800 |
Platen Dimension
Machine Dimmension
Pipe Fittings Injection Technology Express
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK Engineer Finished the Installation of New Magazines in Chile
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China