sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 226 |
| Shot weight | g | 205 |
| Shot speed | mm/s | 160 |
| Screw diameter | mm | 40 |
| Injection pressure | MPa | 248 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2800 |
| Opening Stroke | mm | 600 |
| Space between tie bars | mm x mm | 730 x 730 |
| Mold thickness(min) | mm | 300 |
| Mold thickness(max) | mm | 750 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 60 |
| POWER UNIT | ||
| Pump motor | kW | 24 |
| Heating capacity | kW | 17.35 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 6581 mm |
| B | 1195 mm |
| C | 1667 mm |
| D | 430 mm |
| E | 1463 mm |
| F | 311 mm |
| G | 1876 mm |
| H | 2237 mm |
| I | φ100 mm |
| J | φ3 mm |
Pipe Fittings Injection Technology Express
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK Engineer Finished the Installation of New Magazines in Chile
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
