sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| # | Parameters | Unit | Value |
|---|---|---|---|
| 1 | F.A.D/Max Pressure | M3 | 5.0/0.8 |
| Min | 4.5/1.0 | ||
| MPa | 3.6/1.2 | ||
| 2 | Ambient Temperature | °C | -5°C ~ +45°C |
| 3 | Cooling Mode | Air - Cooling | |
| 4 | Discharge Temperature | °C | Ambient Temperature + 15°C |
| 5 | Lubricant Oil | Liter | 22 |
| 6 | Noise | Db | 72±2 |
| 7 | Driven Mode | Permanent Magnet Synchronous | |
| 8 | Voltage | 380V/50Hz/3Ph | |
| 9 | Power | KW | 30 |
| 10 | Start Mode | Variable Frequency Start | |
| 11 | Dimension | L (mm) | 1440 |
| W (mm) | 980 | ||
| H (mm) | 1540 | ||
| 12 | Net Weight | kg | 324 |
| 13 | Outlet Pipe Diameter | Inch | Rp1-1/2 |
Pipe Fittings Injection Technology Express
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New 4 Cavities Burger King Twin-Cups Side Entry IML System Started Up
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
