sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| # | Parameters | Unit | Value |
|---|---|---|---|
| 1 | F.A.D/Max Pressure | M3 | 38.4/0.8 |
| Min | 32.5/1.0 | ||
| MPa | 28.6/1.2 | ||
| 2 | Ambient Temperature | °C | -5° ~ +45° |
| 3 | Cooling Mode | Air-Cooling | |
| 4 | Discharge Temperature | °C | Ambient Temperature + 15°C |
| 5 | Lubricant Oil | Liter | 128 |
| 6 | Noise | Db | 82±2 |
| 7 | Driven Mode | Direct Drive | |
| 8 | Voltage | 380V/50Hz/3Ph | |
| 9 | Power | KW | 185 |
| 10 | Start Mode | Variable Frequency Start | |
| 11 | Dimension | L (mm) | 3630 |
| W (mm) | 2160 | ||
| H (mm) | 2310 | ||
| 12 | Net Weight | kg | 4100 |
| 13 | Outlet Pipe Diameter | Inch | DN100 |
Pipe Fittings Injection Technology Express
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
