sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1727 |
| Shot weight | g | 1572 |
| Shot speed | mm/s | 194 |
| Screw diameter | mm | 75 |
| Injection pressure | MPa | 156 |
| Screw L:D ratio | -- | 23.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4380 |
| Opening Stroke | mm | 740 |
| Space between tie bars | mm x mm | 765 x 765 |
| Mold thickness(min) | mm | 280 |
| Mold thickness(max) | mm | 780 |
| Hydraulic ejection stroke | mm | 170 |
| Hydraulic ejection force | kN | 90 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 33.6 |
| GENERAL | ||
| Oil tank capacity | L | 750 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7550 mm |
| B | 3975 mm |
| C | 70 mm |
| D | 510 mm |
| E | 60 mm |
| F | 200 mm |
| G | 800 mm |
| H | 800 mm |
| I | 800 mm |
| J | 1225 mm |
| K | 300 mm |
| L | 1455 mm |
| M | 1545 mm |
| N | 200 mm |
| O | 60 mm |
| P | 870 mm |
Pipe Fittings Injection Technology Express
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
Why is An IML Package Regarded an Eco-friendly Package?
SWITEK Engineer Finished the Installation of New Magazines in Chile
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
