sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 843 |
| Shot weight | g | 767 |
| Shot speed | mm/s | 189 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 200 |
| Screw L:D ratio | -- | 24 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3000 |
| Opening Stroke | mm | 590 |
| Space between tie bars | mm x mm | 610 x 585 |
| Mold thickness(min) | mm | 200 |
| Mold thickness(max) | mm | 640 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 30 |
| Heating capacity | kW | 24.7 |
| GENERAL | ||
| Oil tank capacity | L | 400 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 6860 mm |
| B | 3560 mm |
| C | 735 mm |
| D | 390 mm |
| E | 60 mm |
| F | 2050 mm |
| G | 1560 mm |
| H | 1465 mm |
| I | 845 mm |
| J | 2460 mm |
| K | 4920 mm |
| L | 2050 mm |
| M | 1160 mm |
| N | 1210 mm |
| O | 1650 mm |
Pipe Fittings Injection Technology Express
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
