sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 593 |
| Shot weight | g | 540 |
| Shot speed | mm/s | 196 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 152 |
| Screw L:D ratio | -- | 19.2 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1780 |
| Opening Stroke | mm | 450 |
| Space between tie bars | mm x mm | 485 x 465 |
| Mold thickness(min) | mm | 180 |
| Mold thickness(max) | mm | 520 |
| Hydraulic ejection stroke | mm | 130 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 19 |
| Heating capacity | kW | 16.3 |
| GENERAL | ||
| Oil tank capacity | L | 220 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 5900 mm |
| B | 3000 mm |
| C | 595 mm |
| D | 370 mm |
| E | 60 mm |
| F | 1750 mm |
| G | 1100 mm |
| H | 1150 mm |
| I | 724 mm |
| J | 2100 mm |
| K | 4220 mm |
| L | 1740 mm |
| M | 950 mm |
| N | 990 mm |
| O | 1430 mm |
Pipe Fittings Injection Technology Express
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
