sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 442 |
| Shot weight | g | 323 |
| Shot speed | mm/s | 510 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 195 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2800 |
| Opening Stroke | mm | 675 |
| Space between tie bars | mm x mm | 630 x 630 |
| Mold thickness(min) | mm | 330 |
| Mold thickness(max) | mm | 710 |
| Hydraulic ejection stroke | mm | 200 |
| Hydraulic ejection force | kN | 73 |
| POWER UNIT | ||
| Pump motor | kW | 108 |
| Heating capacity | kW | 22.3 |
| GENERAL | ||
| Oil tank capacity | L | 580 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 222 mm |
| B | 86 mm |
| C | 990 mm |
| D Max | 1648 mm |
| G | 2244 mm |
| M | 6673 mm |
| F Min | 1118 mm |
| S | 33 mm |
| SH | 1762 mm |
Pipe Fittings Injection Technology Express
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
