sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 323 |
| Shot weight | g | 236 |
| Shot speed | mm/s | 610 |
| Screw diameter | mm | 45 |
| Injection pressure | MPa | 192 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2100 |
| Opening Stroke | mm | 575 |
| Space between tie bars | mm x mm | 580 x 580 |
| Mold thickness(min) | mm | 340 |
| Mold thickness(max) | mm | 690 |
| Hydraulic ejection stroke | mm | 180 |
| Hydraulic ejection force | kN | 73 |
| POWER UNIT | ||
| Pump motor | kW | 89 |
| Heating capacity | kW | 15.7 |
| GENERAL | ||
| Oil tank capacity | L | 420 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 156 mm |
| B | -269 mm |
| C | 1022 mm |
| D Max | 1655 mm |
| G | 2244 mm |
| M | 5754 mm |
| F Min | 1095 mm |
| S | 237 mm |
| SH | 1152 mm |
Pipe Fittings Injection Technology Express
China IML System Proivder | Guang Dong Switke Technology Co., Ltd.
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
