sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 177 |
| Shot weight | g | 161 |
| Shot speed | mm/s | 610 |
| Screw diameter | mm | 35 |
| Injection pressure | MPa | 265 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1600 |
| Opening Stroke | mm | 500 |
| Space between tie bars | mm x mm | 520 x 520 |
| Mold thickness(min) | mm | 275 |
| Mold thickness(max) | mm | 585 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 59 |
| POWER UNIT | ||
| Pump motor | kW | 76 |
| Heating capacity | kW | 9.4 |
| GENERAL | ||
| Oil tank capacity | L | 380 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 156 mm |
| B | -14 mm |
| C | 992 mm |
| D Max | 1625 mm |
| G | 2064 mm |
| M | 5398 mm |
| F Min | 887 mm |
| S | 237 mm |
| SH | 1151 mm |
Pipe Fittings Injection Technology Express
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
