sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2863 |
| Shot weight | g | 2605 |
| Shot speed | mm/s | 693 |
| Screw diameter | mm | 90 |
| Injection pressure | MPa | 161 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 7500 |
| Opening Stroke | mm | 1400 |
| Space between tie bars | mm x mm | 1110 x 960 |
| Mold thickness(min) | mm | 450 |
| Mold thickness(max) | mm | 950 |
| Hydraulic ejection stroke | mm | 300 |
| Hydraulic ejection force | kN | 195 |
| POWER UNIT | ||
| Pump motor | kW | 75 |
| Heating capacity | kW | 54 |
| GENERAL | ||
| Oil tank capacity | L | 730 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2208 mm |
| B | 2106 mm |
| C | 2685 mm |
| D | 2200 mm |
| E | 1506 mm |
| F | 1354 mm |
| G | 1203 mm |
| H | 1027 mm |
| I | 544 mm |
| J | 4055 mm |
| K | 4478 mm |
| M | 3450 mm |
| N | 1607 |
Pipe Fittings Injection Technology Express
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
