sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 3179 |
| Shot weight | g | 2893 |
| Shot speed | mm/s | 607 |
| Screw diameter | mm | 90 |
| Injection pressure | MPa | 213 |
| Screw L:D ratio | -- | 24 |
| CLAMPING UNIT | ||
| Clamping force | kN | 8000 |
| Opening Stroke | mm | 1050 |
| Space between tie bars | mm x mm | 1020 x 1020 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 1000 |
| Hydraulic ejection stroke | mm | 280 |
| Hydraulic ejection force | kN | 18 |
| POWER UNIT | ||
| Pump motor | kW | 116 |
| Heating capacity | kW | 46.9 |
| GENERAL | ||
| Oil tank capacity | L | 1050 |
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
