sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1322 |
| Shot weight | g | 1203 |
| Shot speed | mm/s | 351 |
| Screw diameter | mm | 67 |
| Injection pressure | MPa | 229 |
| Screw L:D ratio | -- | 23.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3980 |
| Opening Stroke | mm | 720 |
| Space between tie bars | mm x mm | 730 x 730 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 730 |
| Hydraulic ejection stroke | mm | 215 |
| Hydraulic ejection force | kN | 11 |
| POWER UNIT | ||
| Pump motor | kW | 60 |
| Heating capacity | kW | 31.1 |
| GENERAL | ||
| Oil tank capacity | L | 760 |
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
