sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 5224 |
| Shot weight | g | 4754 |
| Shot speed | mm/s | 820 |
| Screw diameter | mm | 110 |
| Injection pressure | MPa | 180 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 10000 |
| Opening Stroke | mm | 1230 |
| Space between tie bars | mm x mm | 1160 x 1160 |
| Mold thickness(min) | mm | 450 |
| Mold thickness(max) | mm | 1160 |
| Hydraulic ejection stroke | mm | 320 |
| Hydraulic ejection force | kN | 22 |
| POWER UNIT | ||
| Pump motor | kW | 138 |
| Heating capacity | kW | 58.4 |
| GENERAL | ||
| Oil tank capacity | L | 1050 |
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK New 4 Cavities Burger King Twin-Cups Side Entry IML System Started Up
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
