sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1269 |
| Shot weight | g | 1142 |
| Shot speed | mm/s | 99 |
| Screw diameter | mm | 70 |
| Injection pressure | MPa | 173 |
| Screw L:D ratio | -- | 20.6 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3600 |
| Opening Stroke | mm | 690 |
| Space between tie bars | mm x mm | 720 x 670 |
| Mold thickness(min) | mm | 260 |
| Mold thickness(max) | mm | 700 |
| Hydraulic ejection stroke | mm | 180 |
| Hydraulic ejection force | kN | 125 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 26 |
| GENERAL | ||
| Oil tank capacity | L | 510 |
Platen Dimension
Machine Dimmension
Pipe Fittings Injection Technology Express
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK New Cups Carton Loading System is Ready for Delivery
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK Engineer Finished the Installation of New Magazines in Chile
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
