sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 442 |
| Shot weight | g | 402 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 180 |
| Screw L:D ratio | -- | 22.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3000 |
| Opening Stroke | mm | 550 |
| Space between tie bars | mm x mm | 590 x 590 |
| Mold thickness(min) | mm | 220 |
| Mold thickness(max) | mm | 600 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 147 |
| Heating capacity | kW | 21 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Engineer Finished the Installation of New Magazines in Chile
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
