sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 358 |
| Shot weight | g | 326 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 45 |
| Injection pressure | MPa | 210 |
| Screw L:D ratio | -- | 22.2 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2600 |
| Opening Stroke | mm | 500 |
| Space between tie bars | mm x mm | 570 x 520 |
| Mold thickness(min) | mm | 200 |
| Mold thickness(max) | mm | 560 |
| Hydraulic ejection stroke | mm | 140 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 115 |
| Heating capacity | kW | 18 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Pipe Fittings Injection Technology Express
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK Engineer Finished the Installation of New Magazines in Chile
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
