sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 162 |
| Shot weight | g | 147 |
| Shot speed | mm/s | 200 |
| Screw diameter | mm | 36 |
| Injection pressure | MPa | 203 |
| Screw L:D ratio | -- | 20.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1300 |
| Opening Stroke | mm | 380 |
| Space between tie bars | mm x mm | 420 x 420 |
| Mold thickness(min) | mm | 150 |
| Mold thickness(max) | mm | 450 |
| Hydraulic ejection stroke | mm | 130 |
| Hydraulic ejection force | kN | 45 |
| POWER UNIT | ||
| Pump motor | kW | 49 |
| Heating capacity | kW | 7.5 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
SWITEK Engineer Finished the Installation of New Magazines in Chile
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
