sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 226 |
| Shot weight | g | 206 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 40 |
| Injection pressure | MPa | 201 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1700 |
| Opening Stroke | mm | 450 |
| Space between tie bars | mm x mm | 520 x 520 |
| Mold thickness(min) | mm | 160 |
| Mold thickness(max) | mm | 520 |
| Hydraulic ejection stroke | mm | 120 |
| Hydraulic ejection force | kN | 30 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Machine Dimension
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK Engineer Finished the Installation of New Magazines in Chile
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
IML Package -- A Perfect Substitution of Two Compartments IML Cups
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
