sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 64 |
| Shot weight | g | 58 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 26 |
| Injection pressure | MPa | 201 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1000 |
| Opening Stroke | mm | 360 |
| Space between tie bars | mm x mm | 420 x 420 |
| Mold thickness(min) | mm | 150 |
| Mold thickness(max) | mm | 400 |
| Hydraulic ejection stroke | mm | 100 |
| Hydraulic ejection force | kN | 20 |
| POWER UNIT | ||
| Pump motor | kW | 28 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Machine Dimension
Platen Dimension
Pipe Fittings Injection Technology Express
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
