sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 21336 |
| Shot weight | g | 19416 |
| Shot speed | mm/s | 71 |
| Screw diameter | mm | 170 |
| Injection pressure | MPa | 139 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 22000 |
| Opening Stroke | mm | 2800 |
| Space between tie bars | mm x mm | 1850 x 1600 |
| Mold thickness(min) | mm | 800 |
| Mold thickness(max) | mm | 1700 |
| Hydraulic ejection stroke | mm | 450 |
| Hydraulic ejection force | kN | 390 |
| POWER UNIT | ||
| Pump motor | kW | 165 |
| Heating capacity | kW | 97 |
| GENERAL | ||
| Oil tank capacity | L | 2700 |
Platen Dimension
Machine Dimmension
Pipe Fittings Injection Technology Express
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
