sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 475 |
| Shot weight | g | 432 |
| Shot speed | mm/s | 517 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 182 |
| Screw L:D ratio | -- | 25.3:1 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4500 |
| Opening Stroke | mm | 680 |
| Space between tie bars | mm x mm | 730 x 660 |
| Mold thickness(min) | mm | 300 |
| Mold thickness(max) | mm | 750 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 77 |
| POWER UNIT | ||
| Pump motor | kW | 110 |
| Heating capacity | kW | 28.5 |
| GENERAL | ||
| Oil tank capacity | L | 625 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 2147 mm |
| B | 8030 mm |
| C | 8110 mm |
| D | 2546 mm |
| E | 2018 mm |
Pipe Fittings Injection Technology Express
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
