sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 69 |
| Shot weight | g | 63 |
| Shot speed | mm/s | 200 |
| Screw diameter | mm | 28 |
| Injection pressure | MPa | 235 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1300 |
| Opening Stroke | mm | 400 |
| Space between tie bars | mm x mm | 510 x 460 |
| Mold thickness(min) | mm | 150 |
| Mold thickness(max) | mm | 550 |
| Hydraulic ejection stroke | mm | 100 |
| Hydraulic ejection force | kN | 34 |
| POWER UNIT | ||
| Pump motor | kW | 15 |
| Heating capacity | kW | 6.42 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 4976 mm |
| B | 717 mm |
| C | 1219 mm |
| D | 290 mm |
| E | 1260 mm |
| F | 291 mm |
| G | 1553 mm |
| H | 2013 mm |
| I | φ100 mm |
| J | φ2.6 mm |
Pipe Fittings Injection Technology Express
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
