sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 192 |
| Shot weight | g | 175 |
| Shot speed | mm/s | 205 |
| Screw diameter | mm | 35 |
| Injection pressure | MPa | 225 |
| Screw L:D ratio | -- | 23.4 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1300 |
| Opening Stroke | mm | 430 |
| Space between tie bars | mm x mm | 410 x 410 |
| Mold thickness(min) | mm | 145 |
| Mold thickness(max) | mm | 450 |
| Hydraulic ejection stroke | mm | 120 |
| Hydraulic ejection force | kN | 41 |
| POWER UNIT | ||
| Pump motor | kW | 72 |
| Heating capacity | kW | 9.3 |
| GENERAL | ||
| Oil tank capacity | L | 200 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 1700 mm |
| B | 1486 mm |
| C | 1936 mm |
| D | 3878 mm |
| E | 4586 mm |
| F | 1104 mm |
| G | 1203 mm |
| H | 650 mm |
| I | 800 mm |
| J | 660 mm |
| K | 601.5 mm |
Pipe Fittings Injection Technology Express
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK Engineer Finished the Installation of New Magazines in Chile
Contact Us
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
