sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
It's very lucky to be the representative of GuangDong SWITEK Technology Co., Ltd. in VietnamPlas 2025, the largest exhibition of Plastic Industry in the Socialist Republic of Viet Nam held in Ho Chi Minh city. As a sales of the robotic and automation solutions for injection molding, this is my second time to visit Viet Nam and VietNamPlas since 2019, I learned a lot of the injection molding industry from VietNamPlas 2025 and have a better understanding of the IML technology development in VietNam.
As a South-east country, the Socialist Republic of Viet Nam has an average temperature of 23°C ~ 25°C and cold drink is very popular among the Vietnamese. We can see that there're coffee shops alone the street and the cold drinks go alone with the meals, which means that there're a huge Potential of IML beverage cups market because an IML beverage cups has a much better quality compared to the thermo-forming cups and is a better choice for the premium brands.
In VietnamPlas 2025, the only IML solution on show is the single cavity 5L bucket IML solution by WELLTEC with their all electric injection molding machine 423SEc/e. Although the single cavity side entry IML solution doesn't show up much new technology of IML production for bucket, but the shining lable of the bucket attracted the attention of the visitors, which was provided by the Chinese IML label producer ZheJiang ZhongYu Science and Technology Co., Ltd.(YZY). Not only YZY, nearly all the key IML label producers in China showed up in the show which include ZheJian Jinyan, JianShu HanLi, Jiangsu Tesion Print. They're representing the top technology of IML label producing in China. Two Cavities Buckets IML Solution with Handle Assembly 
Since the US president Mr. Trump started the tariffs war in 2018, many Chinese entrepreneurs are probing the possibility of having Vietnam as the springboard to the US market and Vietmanese government attracted many investment from China since then. But the new policy of tariffs make it seems not an easy way. And with more investment form China, the shortage of quality labour force and different culture seems the hurdle to attract more Chinese entrepreneurs to set up branches in China. But anyway, as the neighbouring country to China, Vietnam is still one of the largest potential market in South-east Asia.
4 Cavities Valve In Mold Insertion Injection Automation
BL300EKH/C1600 -- BOLE High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 819 g |
| 3 | Shot Speed | 112 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 590 mm |
| 6 | Space Between Tie Bars | 655 x 605 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 660 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 19.55 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
