SOXI Intelligent Equipment Co., Ltd. the injection auxiliary manchinery producter and the whole factory injection automation system integrator eastablished in 2017, on showed solutions of centralized material feeding for injection molding at Chinaplas 2025 with a one stop purchasing solution of injection auxiliary machineries.

Focus on the R&D, production and sales of injection molding periphera equiremnet, SOXI provide an one stop purchasing solution of injection peripheral machinery which include:

• Plastic Dryer
• Mold Temperature Controller
• Auto Loader
• Plastic Crusher
• Plastic Mixer
• Industrial Chiller
• Central Loading System

In a modern injection molding plant especially the plant for the production of containers for food, a central loading system will help the producers well control the consuming of the plastic material with high quality products output. It's also a basic system of a clean room production environment. SOXI Intelligent Equipment Co., Ltd. is just one of the companies who are providing the central loading systems design and installation service at Chinaplas 2025.

PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?

PVC Pipe Fittings Runner Cutting Solutions

For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:

• Injection Molding Machine: HaiTian MA4500
• Picking Robot: SWITEK SW6712S 3 Axis Servo Injection Robot
• Mold Design: 16 Cavities
• Air Nipper: 4pcs
• Cycle Time: 60s

The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.

For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.