sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
Chinaplas 2025, QingDao Sarlwer Automation on show turn-key solutions of 4 Cavities 1L IML buckets production with both side entry and top entry IML robot. Unlike the other exhibition of cooperation with other injection molding machine manufacturer, Sarlwer Automation have an own brand injection molding machine SW458 to finish the injection molding process.
As one of the economic IML solutions provider in China, Sarlwer Automation put on market a series of IML robot for different IML containers, mainly top entry and side entry IMl robot for the medium and large size containers like paint buckets.
On show a turn-key solutions of IML is a trend among the IML solutions providers which will provide the customer with a ready to work IML system and free from the disputes among the suppliers of injection molding machine, the mold and the IML robots. As the system intgerator of the IML solutions, it's no doubt that the R&D team of Serlwer Automation would be more professional than the purchasing team of the buyer and has a better understanding of the China injection machinery producers.
4 Cavities Valve In Mold Insertion Injection Automation
U265TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2650 kN |
| 2 | Shot Weight | 596 g |
| 3 | Shot Speed | 190 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 585 x 565 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
