Haitian On Show Turn-key Solutions of IML Shoehorn by MA1600 at PlastImagen 2025

Haitian, the wrold largest manufacturer of injection molding machine, on show their 5^th generation of high precision servo injection molding machine MA1600 with top entry IML solutions for the production of shoehorn with degradable plastic at PlastImagen 2025.

Details of MA1600

INJECTION UNIT		A	B	C
Screw diameter	mm	40	45	50
Screw L/D ratio	L/D	22.5	20	18
Injection volume (theoretical)	cm³	253	320	395
Injection weight (PS)	g	230	291	359
Injection Rate	g/s	111	141	174
Injection rate (ESG)	g/s	150	190	235
Injection Pressure	MPa	225	178	144
Plasticizing rate (GPPS)	g/s	17.0	22.6	28.4
Screw speed	rpm	0~215
CLAMPING UNIT
Clamping force	kN	1600
Mold opeing stroke	mm	430
Dist. between tie bars (H x V)	mm	470 x 470
Mold height max.	mm	520
Mold height min.	mm	180
Ejector stroke	mm	140
Ejector tonnage	kN	33

Tips for a Top Entry IML System with MA1600

As a small size injection molding machine, the size of the parts produced by MA1600 would be a small sized one, and the size of the robotic arms for the IML system would be limited. The suitable robotic arms would be the 3 axis servo injection robot SW6308S or SW7110S which has a payload of 3kg and vertical stroke 800~1000mm.
The height of the parts producable. Since the mold opening stroke of MA1600 is only 430mm, it's not suitable for the IML production of a plastic parts with a height (thickness) more than 140mm.
As a standard servo injection molding machine with an injection rate up to 235g/s, it's not suitable for the production of thin-wall containers like snack box, cups etc.
To ensure the success of an top entry IML system, please prepare the details of the injection molding machine, the 3D drawing of the mold (.stp/x_t) and the 3D drawing of the parts.

Haitian On Show Turn-key Solutions of IML Shoehorn by MA1600 at PlastImagen 2025

PVC/PPR Pipe Fittings Injection Molding Automation Solutions Demonstration

Contact SWITEK On WhatsApp Now