sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
K-2022, Zhafir On Show Jenius Series Hybrid Injection Molding Machine
Tags: K-2022, K-SHOW, K-FAIR, ZHAFIR Jenius Series Hybrid Injection Molding Machine, SWITEK Injection Robot
K-show 2022, Haitian group on show new Jenius Hybrid injection molding machine targeted at the market of which request specific quality requirements like white goods or the automative industry.
As the largest plastic related exhibition in the world, K-Show attracted the attention of plastic material, injection machinery, automation solution, plastic recycling etc. It's no doubt that all the exhibitor will showcase their cutting edge solution. The machine on show K 2022 is JE3600III-1700 hybrid injection molding machine in demo production of 1 cavity mount for suspension arms from PP GF30 at a cycle time of 45.6s.
To maximize the productivity of the hybrid injection molding machine and ensure the products quality, the best injection robot for Zhafir Jenius series would be SWITEK SW7 Series Injection Robot, with kick-back design, it will provide more space for EOAT with a payload up to 75kg, will meet the demand of all application in the production of automative industry.
JM328-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3280 kN |
| 2 | Shot Weight | 1347 g |
| 3 | Shot Speed | 472 mm/s |
| 4 | Screw Diameter | 75 mm |
| 5 | Opening Stroke | 660 mm |
| 6 | Space Between Tie Bars | 680 x 680 mm |
| 7 | Mold Thickness (Min) | 225 mm |
| 8 | Mold Thickness (Max) | 680 mm |
| 9 | Pumper Motor | 48 kW |
| 10 | Heating Capacity | 26 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
