sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
Haitian New 2 Cavities 1L Containers IML Solution Started Up with Zhafir ZE3000F Hybrid Injection Molding Machine
Tags: IML Solutions, HaiTian Injection Molding Machine, Zhafir Hybrid Injection Molding Machine, Turn-key IML Solutions
Haitian new Zhafir hybrid injection molding machine ZE3000F installed for a 2 cavities 1L ice cream containers side entry IML solutions.
The new IML system is a 2 cavities solutions of 1L oval shape box for Ice cream, which is a popular design for ice cream in both India and Russian market. Further more, some customers will request that the container to be labeled with two labels, one wrap label to high light the image of the image of the products and another label to the bottom of the container to provide details information of the ice cream.
Compared to all electric injection molding machine, a hybrid injection molding machine will provide countable injection precision against an all electric injection molding machine and same clamping force to a hydraulic injection molding machine but much lower cost. It's no doubt an idea choice for the producer of IML containers for the food package since it's getting more and more competitive. As one of the best known hybrid injection molding machine in the market, Zhafir ZE3000F is one of the best choice for the IML container producers with sufficient budget.
With the first IML robot put on market in 2009, SWITEK team is experienced in providing you with a professional proposal of any IML project from the mold design to injection molding machine selection. For a turn-key ready to work solutions of IML, please feel free to contact Adams from SWITEK, your personal consultant of IML solutions.
SW-M250-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 234 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 500 mm |
| 6 | Space Between Tie Bars | 575 x 525 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 28 kW |
| 10 | Heating Capacity | 15.3 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
