sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Yizumi On Show Their Turn-key 8 Cavities Pipe Fittings Auto-injection Solutions.
Tags: Yizumi Injection Molding Machine, Yizumi Automation Solutions, Pipe Fittings Injection Solutions, SWITEK Automation, Turn-key Automation Solutions
Yizumi promote their turn-key 8 cavities pipe fittings auto-injection solutions with their energy saving servo injection molding machine UN200 A5S
Pipe fittings here means the plastic pipe fittings made from PVC/PPR with variety of types and size. The turn-key pipe fittings auto-injection solutions promoting with YIZUMI UN200 A5S is a system of small size elbo production system which include the nut sorting, arranging and positioning, the nuts in mold insertion, parts picking, runner cutting. This solution is the counter parts of the pipe fittings production system of the world largest manufacturer LESSO Groupd. With the pipe fittings auto-production system, LESSO Group is expected to reduce 1/3 man hours and increase 20% of the productivity.
With turn-key injection automation solution, the customer will receive a ready to work system well tested before delivery, which will reduce the time for start up of a new system and reduce the cost of purchasing and traing to earn your investment back faster.
Servo Hydraulic Injection Molding Machine 320 SEIII A -- Welltec Machinery Ltd.
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3200 kN |
| 2 | Shot Weight | 836 g |
| 3 | Shot Speed | 224 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 700 mm |
| 6 | Space Between Tie Bars | 680 x 680 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 700 mm |
| 9 | Pumper Motor | 220 kW |
| 10 | Heating Capacity | 22.15 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
