sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
YIZUMI Celebrate the Opening of Sao Paulo Technical Center with Various of Turn-key Injection Automation Solutions
Tags: Brazil Yizumi, Yizumi injection molding machine, all electric injection molding machine, Brazil injection molding machine distributor
YIZUMI celebrated the opening of the Sao Paulo Technical Center, with over 300 guests in attendance for various turn-key Injection Automation Solutions for Brazilian market.
As one of the fastest growing injection molding machine manufacturer from China, YIZUMI is now one of the most welcomed injection molding machine manufacturer with its high speed hydraulic injection molding machine P Series; Energy saving servo injection molding machine UN Series and all electric injection molding machine FF Series. To celbrate the opening of Sao Paulo technical center, Yizumi prepared turn-key injection solutions with their star injection molding machine which included:
With the opening of Sao Paulo Technical Center, YIZUMI will be able to provide local market with:
SW-M250-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 234 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 500 mm |
| 6 | Space Between Tie Bars | 575 x 525 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 28 kW |
| 10 | Heating Capacity | 15.3 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
