sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
WETEC Showcased IML Solutions of 4 Cavities Cups at the Cycle Time of 2.9s
Tags: WETEC IML Robot, Chinaplas 2024, JONWAI Injection Molding Machine, IML Solutions
WETEC showcased 4 cavities cups side entry high speed IML production at the cycle time of 2.9s with the injection molding done by JONWAI 130T SEWT injection molding machine at Chinaplas 2018
The IML solution showcased at Chinaplas 2018 with WETEC high speed side entry IML robot is a demonstration of the efficient IML production of throwaway cups of ultra thin-wall injection. With a cycle time of 2.9s, the daily output of the system can be up to around 105,000pcs of throwaway cups, which is really an efficient IML production solution of throwaway cups.
As one of the key suppliers of IML solutions, Wetec will always bring the visitors their new solutions of IML in the major shows of injection automation like Chinaplas. With the Chinaplas 2024 opening on April 23, 2024 in Shanghai, we're looking forward to the performance of Wetec new cutting edge IML technology.
SW-M280-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2800 kN |
| 2 | Shot Weight | 772 g |
| 3 | Shot Speed | 262 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 625 x 575 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 17.2 kW |
For PVC/PPR pipe fittings with nuts with a diameter of around φ25mm most of the producer will choose an injection molding machine of around 250T and a mold cavities of 8 Cavities, will a more cavities mold design with a larger injection molding machine a better choice for pipe fittings producers?
According to the experience of working with LESSO group in the automiztion of their PVC/PPR pipe fittings injection production system, we finally decide to have an 8 cavities mold deisgn with 250T injection molding machine because:
Anyway, to upgrade your PVC/PPR pipe fittings injection molding system you must keep in mind that it's only valuable to have an automation system for bulk production products, which means that one injection molding machine with only one mold to be equipped with one automation system for the pipe fittings' Nut insertion, runner cutting and parts picking.
For any other question about a PVC/PPR pipe fittings auto-production system please contact Adams from SWITEK for a turn-key solutions of pipe fittings production.
