sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Welltec Machinery On Show Turn-key 4 Cavities Yogurt Cups Side Entry IML Solutions with High Speed Servo Injection Molding Machine 283SEC
Tags: Welltec Machinery, High Speed Hydraulic Injection Molding Machine, Servo Injection Molding Machine, Welltec 283SEC, SWITEK IML Robot, Welllih IML Robot.
Welltec machinery on show turn-key 4 cavities Yogurt cups side entry IML Solutions with new high speed hydraulic injection molding machine 283SEC and Welllih side entry IML robot.
High speed hydraulic injection molding machine is a very popular solution for the production of small size Yogurt cups. It's a combination of low budget investment + high productivity. For small size Yogurt cups a side entry IML robot will yield a much higher productivity compared to the the top entry counter part at a total cycle time 5~8s with a total investment around $215000 to achieve a perfect balance of investment and productivity.
In this project the side entry IML robot is provide by Welllih, it's counter part is SWITEK high speed side entry IML robot SW833-19. With modular design, it's convenient for the replacement of magazines and EOAT for fast mould change and start up. It's the best choice for small and medium size producer which requested to produce different parts in one injection molding machine.
U265TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2650 kN |
| 2 | Shot Weight | 596 g |
| 3 | Shot Speed | 190 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 585 x 565 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.
Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:
For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.
