sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
Tags: IML Robot, Top Entry IML System, IML Solutions, IML Solutions for Paint Bucket
SWITEK is in house testing two sets more top entry IML system for 20L buckets before delivery to ensure that our customer will receive a ready to work IML system for paint bucket production.
Since the 20L IML paint bucket would be produced in a 750T injection molding machine, the IML robot for this system is our SW7518DS which is a kick-back designed robot with a payload up to 15kg for injection molding machine from 500~1800T. As a kick-back designed IML robot, it'll provide about more than 30% of the space for EOAT movement which make it one of the best IML robot for a top entry IML system for deep cavity IML products like 20L paint bucket.
For small and meidum size producer of IML paints buckets, a one cavity top entry IML system would be a price smart choice which will include:
HXF270 -- Haixing High Precision Energy Saving Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2700 kN |
| 2 | Shot Weight | 442 g |
| 3 | Shot Speed | 106 mm/s |
| 4 | Screw Diameter | 50 mm |
| 5 | Opening Stroke | 550 mm |
| 6 | Space Between Tie Bars | 620 x 581 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 610 mm |
| 9 | Pumper Motor | 27 kW |
| 10 | Heating Capacity | 17.3 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
