sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
Tags: SWITEK Automation, IML Solutions, IML Robot, PAC380K High Speed Injection Molding Machine
SWITEK Automation finalized the pre-production testing of a new 6 cavities Yogurt cups side entry IML System with its high speed side entry IML Robot.
The system is one of the turn-key IML Solutions which finished by SWITEK Automation for dairy products. With the booming economy in China, the IML pacakging is wining much more attention especially among the dairy products producer and beverage chain restaurant. The IML Robot in this project is one of the most popular IML robot put in market by SWITEK Automation in year 2018, with more than 4 years continued optimization,it's one of the fastest IML robot in China for small and medium size IML containers.
To extend the productivity of the IML System, the IML container can consider to add vision control and packing unit to the production line to reduce the man hour and increase the productivity of the system.
JM208-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2080 kN |
| 2 | Shot Weight | 393 g |
| 3 | Shot Speed | 169 mm/s |
| 4 | Screw Diameter | 46 mm |
| 5 | Opening Stroke | 510 mm |
| 6 | Space Between Tie Bars | 530 x 530 mm |
| 7 | Mold Thickness (Min) | 180 mm |
| 8 | Mold Thickness (Max) | 550 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
